Material Safety
Data Sheet


According To EC Directive 91/155/EEC

Identification of the Substance/Preparation and of the Company/Undertaking
Identification of the product
Catalogue No ::,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Product Name :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Use of the substance/preparation : Chemical Production and Ceramic Raw Company/undertaking identification,,,,,,

Company/undertaking identification
Company : PT. Dian Lestari Sejahtera, Jakarta, Indonesia Phone +6221 5482482
Emergency Telephone No : : Customer Call Centre +6221 5357569, +6221 8980234 (Factory)

Composition/Information on Ingredients
Density : 2.6 g/ml (20oC) EC-No. : 310-127-6
Chemical Formula : Al2O3,SiO4,CaO

Hazards Identification
No hazardous product as specified in Directive 67/548/EEC

First Aid Measures
After inhalation : Fresh air
After skin contact : Wash of with plenty of water, Remove contaminated clothing.
After eye contact : Rinse out with plenty of water with the eyelid held wide open.
After swallowing : Make victim drink plenty water, consult doctor if feeling unwell

Fire-Fighting Measures
Suitable extinguishing media : In adaption to materials stored in the immediate neighborhood.
Special risks : No-combustible.
Special protective equipment for fire fighting : Do not stay in dangerous zone without self-contained breathing apparatus.

Accidental Release Measures
Person-related precautionary measures : Avoids generation of dust; do not inhale dusts.
Procedures for cleaning/absorption : Take up dry. Forward for disposal. Clean up affected area.

Handling and Storage Handling : No further requirements
Storage : Tightly closed, Dry, Storage temperature, no restrictions.

Exposure Controls/Personal Protection
Personal Protective equipment : Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled. The esistance of the protective clothing to chemicals should be ascertained with the respective supplier.
Respiratory protection : Required when dusts are generated.

Eye protection : Required

Hand protection : In full Contact
Glove material : Nitrile rubber
Layer thickness : 0.11 mm
Breakthrough time : > 480 Min
In splash contact : Use Glove

The protective gloves to be used must comply with the specications of EC directive 89/686/EEC and the resultant standard EN374, example KCl 741 Dematril ® L (full contact), 741 Dematril ® L (splash contact). The breakthrough times stated above were determined by KCl; in laboratory tests acc to EN374with samples of the recommended glove types.
Industrial hygiene : Change contaminated clothing. Application of skin-protective barrier cream recommended. Wash hands after working with substance.

Physical and Chemical Properties
Form : solid
Color : white
Odor : odorless
pH value at 50 g/l H2O : 6 - 7
Melting point : not available
Boiling point : not available
Ignition temperature : not available
Flash point : not available
Explosion limits lower : not available
Upper : not available
Bulk Density (20°C) : ~350 kg/m3
Soluble in water (20°C) : insoluble

Stability and Reactivity
Conditions to be avoided : no information available
Substances to be avoided : no information available
Hazardous decomposition product : no information available

Toxicological Information
Acute toxicity : Quantitative data on the toxicity of this product are not available.
Further toxicological information : The investigation result available do not indicate any toxic effects fter inhalation of dust: irritation symptoms in the respiratory tract.
Other notes : Sensitization possible in predisposed person.
Further data : The product should be handled with the care usual when dealing with chemicals.

Ecological Information
Ecotoxic effects : Quantitative data on the ecological effect of this product are not available.
Further ecologic data : No ecological problems are to be expected when the product is handled and used with due care and attention.

Disposal Considerations
Product : Chemical must be disposed of in compliance with the respective national regulations. Under you will find country and substance-specific information as well as contact partners.

Packaging : PT. DLS product packaging must be disposed of in compliance with the country-specific regulations or must be passed to a packaging return system. Under you will find special information on the respective national conditions as well as contact partners.

Transport information : Not subject to transport regulations.

Regulatory information
Labeling according to EC Directive
Symbol : ---
R-phrases : ---
S-phrases : ---

Other Information
Reason for alteration : General update